Connect streaming devices, stereo systems, Tv and surround systems to existing Beolab speakers from Bang and Olufsen with Trigger cables for B&O.
Original AV-Advance B&O compatible trigger adapter cables to connect 3. party stereo, streaming or home theater equipment (with pre-out) to active Bang and Olufsen BeoLab speakers with Powerlink connection.
Connect B&O speakers with 3dr party devices
The most common active Bang and Olufsen speakers (BeoLab 3/4000/6000/8000 among others), has a normal line input, which can trigger a speaker to turn on automatically when music is sent to the speaker. Connection to the line input is basically a good solution for connecting other devices for music to the speakers. However when the B&O BeoLab speaker is used for surround, there is a risk that the speaker turns off during quiet passages in movies, and the speaker will use some time to start up again by passages with sound.
Stereo adaptercable 35cm for connecting B&O Beolab speakers with powerlink to equipment with 3,5mm minijack and usb trigger or usb powersupply. - SEE MORE
AV-advance Trigger Adapter for receivers where you want to add more trigger outputs. Perfect for use with our Trigger adapter cables for B&O speakers - SEE MORE
MasterPlay convertor from Powerlink or analogue input to B&O Masterlink - compatible with BeoLab 3500, 2000, LCS9000 and Beolink passive & active - SEE MORE
Trigger adapter for e.g. Denon and Marantz with disconnected ground that eliminates the problem of noise and hum when using a B&O Trigger adapter. - SEE MORE
Sonos streaming solution for existing active B&O speakers, for example, BeoLab 6000 and BeoLab 8000. - SEE MORE
More info about Trigger cable for B&O
How to avoid B&O speakers to turn off on low volume
The phenomenon with the active B & O BeoLab speakers turns on and off, while watching a movie, will not happen with the AV-advance Trigger cables, since it ensures that BeoLab loudspeakers are switched on as long as the connected device is on
Remember that the little switch on the B & O speaker must be either 'L' or 'R' depending on whether it is Left or Right speaker.
Active B & O BeoLab speakers that are only equipped with Powerlink such as BeoLab 2 (subwoofer), BeoLab 7-1, BeoLab 7-2, BeoLab 7-4 and BeoLab 7-6, BeoLab 10 and BeoLab 2500 among others can take advantage of this Trigger Adapter cable, as these speakers is no option for ordinary line use at all.
Video is in Danish Language:
AV-Advance trigger adapter cables for Bang and Olufsen are developed and sold exclusively by AV-Connection.
HI-FI STEREO
