DVI cable
VGA cable
AV cables
cable without plugs
AUX cable
AV cable
B&O audio cable
Multi channel audio cable
Subwoofer audio cable
Turntable audio cable and plugs
Analogue audio distribution and convertion
USB memory stick / SD card
USB serial / parallel port
USB Bluetooth adapter
USB card reader
USB network adapter
USB security
USB switch
USB harddisk cabinet
USB wall plate
Colored ethernet cables
Power cable without connectors
Power connector / plug
Power adaptor
Low voltage DC cable and plug
Remote control
Cable clips, holders and hooks
Velcro, cable ties, strips and tape
Crimping sleeve
Cable marker
|
|||||
PowerLink Cable for B&O:The PowerLink cable is primarily used to connect B&O speakers. These PowerLink cables are of high quality, fully on par with the originals from B&O, but at a lower price! There is no noise when adjusting the volume, which is often noticeable as interference in the speakers when using cheap imitation cables. Furthermore, the PowerLink cables are equipped with durable connectors that increase longevity and reduce noise interference.Powerlink MKIII (MK3) - Standard Cable with 4 Conductors: • For Beolab 1, 2, 4, 9, 10, 11, 2500, 4000, 4002, 6000, 6002, 8000 and 8002 • Powerlink cables are intended for 2 audio channels (pin 3 and pin 5), 1 conductor for power-on control (pin 4), digital ground (pin 7) and analog ground (pin 2). • Easy to hide, only 2.5 mm thick • Does not transfer display information used in certain older speakers such as Beolab 3000, Beolab 4500, Beolab 5000 and Penta • Note: For cable runs over 7m and in general for Beolab 3 and 7 (all models), we recommend MKII fully wired cables PowerLink MKII (MK2) - Fully Wired with 8 Conductors PowerLink MKIII (MK3) diagram: Pin 2 - Shield - Ground (Analog) Pin 3 - Brown - Left (Analog) Pin 4 - Yellow - Speaker relay Pin 5 - Green - Right (Analog) Pin 7 - Blue - Ground (Digital) PowerLink MKII (MK2) diagram: Pin 1 - Grey - Power up/down Pin 2 - Shield - Ground (Analog) Pin 3 - Brown - Left (Analog) Pin 4 - Yellow - Speaker relay Pin 5 - Green - Right (Analog) Pin 6 - White - DataLink Pin 7 - White (shield) - Ground (DataLink) Pin 8 - Pink - Overload • PowerLink MKII (MK2) - Fully Wired with 8 Conductors |
Cavus is a Dutch brand with a large selection of fittings for AV equipment. Cavus produces fittings for well-known brands such as B&O, BOSE, Heos and of course Sonos.
Unfortunately, as manufacturers do not make manuals or guides in all languages, we cannot guarantee that a local language manual is included for the item.
- If you are unsure about a manual available in the desired language, just contact us and we will do what we can to help.
AV-Connection A/S • VAT no.: DK27907547 • Kaervej 71-73 • 6400 Soenderborg • Denmark • Tel. +45 7442 1078 • E-mail: [email protected]
HIFI STEREO
