LK FUGA Hospital Socket Outlet with Earth, without Switch, White | 1,5 meter

Highlights:

• Hospital socket outlet for dedicated hospital electrical networks
• Special design prevents the connection of standard plugs
• 2-pole earthed socket outlet from the LK FUGA series
• Horizontal phase contact for special hospital plugs
• Tamper-resistant design with screwless connection terminals
• Flexible installation in mounting boxes and surface-mounted frames
• White cover with 6 mm collar included

Socket outlet for dedicated hospital installations:

The LK FUGA hospital socket outlet is designed for installations where a separate hospital electrical network must be reserved for specific equipment. The socket features a horizontally positioned phase contact that accommodates special hospital plugs while preventing standard plugs from being connected. This helps keep unauthorised electrical appliances separate from the dedicated network. The socket outlet is 2-pole with earth and must only be used in hospital installations.

Flexible installation and convenient connections:

The white socket outlet is part of the LK FUGA series and occupies 1.5 modules. It is designed for flush mounting in installation boxes for masonry, concrete casting, front insertion and lightweight partition walls. It can also be installed in surface-mounted and panel mounting frames. When installed in a panel mounting frame, a 14 mm spacer frame is required. The included cover features a 6 mm collar, while the socket insert has a tamper-resistant design. The screwless terminals accommodate two conductors of either 1.5 mm² or 2.5 mm² per terminal, with one conductor in each opening.

Specifications:

• Product type: Hospital socket outlet
• Series: LK FUGA
• Module size: 1.5 modules
• Poles: 2-pole with earth
• Socket type: Hospital, for special hospital plugs
• Phase contact: Horizontal
• Colour: White
• Protection rating: IP20
• Application: Indoor hospital installations
• Installation: Flush mounting in installation boxes or surface-mounted and panel mounting frames
• Panel mounting frame: Requires 14 mm spacer frame
• Connection: Screwless terminals, 2 x 1.5 mm² or 2 x 2.5 mm² per terminal
• Cover: Included, with 6 mm collar
• Design: Tamper-resistant