|
|||||
Highlights:• Network conditioner with 4 RJ45 inputs and 4 RJ45 outputs• Optical galvanic isolation breaks the electrical connection between input and output • Active signal regeneration reconstructs the digital data stream • Reduces electrical noise and timing jitter in the network connection • Supports Ethernet at 10, 100 and 1000 Mbps • Suitable for streamers, network bridges, digital processors and audio servers • Compatible with the SilentPower OMNI RACK Mount kit for 1U rack mounting Optical isolation for demanding AV networks:The SilentPower LAN iPurifier Pro 4 is designed for network-based AV systems where multiple devices require a conditioned Ethernet connection. With four RJ45 inputs and four RJ45 outputs, it can serve as a central solution for devices such as streamers, network bridges, digital processors and audio servers.Electrical interference travelling through a network connection can affect timing during subsequent digital conversion. The LAN iPurifier Pro 4 addresses this with optical galvanic isolation combined with active signal regeneration. The purpose is to reduce transmitted electrical noise and timing jitter, allowing connected AV devices to receive a cleaner and precisely reconstructed data stream. Electrical connection replaced by an optical barrier:Instead of relying solely on transformer-based isolation, the LAN iPurifier Pro 4 converts the incoming electrical network signal into light. The data is transmitted across an optical barrier and then converted back into an electrical signal on the output side. This removes the direct electrical signal path between input and output.The galvanic isolation is designed to block common-mode noise, stray voltages and interference caused by parasitic capacitance. This is particularly relevant in complex AV installations where multiple devices, power supplies and network connections can create several potential paths for electrical interference. Ethernet data can be transmitted at 10, 100 or 1000 Mbps, allowing the unit to support standard Gigabit Ethernet connections. Active regeneration of the data stream:After optical isolation, the digital data stream is reconstructed using active electronics. SilentPower describes the process as bit-perfect reconstruction, where the signal is rebuilt after the isolation stage rather than simply being passed through passively. The combination of galvanic isolation and signal regeneration is designed to reduce interference and jitter before the Ethernet signal is passed on to the connected devices.The LAN iPurifier Pro 4 uses RJ45 Ethernet for both inputs and outputs and supports IEEE 802.3x. Its compact enclosure measures 21.4 x 13.3 x 4.1 cm. The unit is also compatible with the SilentPower OMNI RACK Mount kit, allowing integration into a 1U rack in professional and advanced AV installations. Specifications:• Inputs: 4 x RJ45 female• Outputs: 4 x RJ45 female • Interface: RJ45 Ethernet • Ethernet speeds: 1000 Mbps, 100 Mbps and 10 Mbps • Ethernet standard: IEEE 802.3x • Isolation: Optical galvanic isolation • Signal processing: Active regeneration of the digital data stream • Power supply: 5 V DC / 4 A, centre-positive • Power consumption: Approx. 15 W • Dimensions: 4.1 x 13.3 x 21.4 cm (H x W x L) • Net weight: 872 g • Rack compatibility: SilentPower OMNI RACK Mount kit, 1U
|
Unfortunately, as manufacturers do not make manuals or guides in all languages, we cannot guarantee that a local language manual is included for the item.
- If you are unsure about a manual available in the desired language, just contact us and we will do what we can to help.
AV-Connection A/S • VAT no.: DK27907547 • Kaervej 71-73 • 6400 Soenderborg • Denmark • Tel. +45 7442 1078 • E-mail: [email protected]