Bosscom PowerLink MK2 Cable for B&O - Fully wired, white | White
White Powerlink MKII cable shielded, typically for older B&O speakers with display and Beolab 5, but can generally be used for all Beolab speakers.
PowerLink Cable for B&O: The PowerLink cable is primarily used to connect B&O speakers. The Powerlink cables are of high quality, fully up to par with the original ones from B&O; just cheaper! There is no noise when changing the volume, which can often be heard as noise in the speakers on cheap copy cables. The Powerlink cables are also fitted with good connectors, which increases durability and reduces noise impact.
PowerLink MKII (MK2) - Fully fitted with 8 conductors: • The fully fitted cables can be used for all B&O speakers, i.e. the same as the standard versions, but can also be used to control the display in the speakers or all BeoLab 5 speakers. • Thickness 5,5 mm.
Note: For newer speakers such as BeoLab 3, 4 and 5 etc. pin 7 must be connected, otherwise it may cause noise/hum in the speakers. For installations, we usually recommend the fully assembled cables, as this allows you to connect all speakers.
BC-01360103: PowerLink MK2 Cable for B&O - Fully wired, white | White | 0,30 meter
BC-01360105: PowerLink MK2 Cable for B&O - Fully wired, white | White | 0,50 meter
BC-01360111: PowerLink MK2 Cable for B&O - Fully wired, white | White | 1,00 meter
BC-01360119: PowerLink MK2 Cable for B&O - Fully wired, white | White | 1,8 meter
BC-01360138: PowerLink MK2 Cable for B&O - Fully wired, white | White | 10 meter
BC-01360148: PowerLink MK2 Cable for B&O - Fully wired, white | White | 20 meter
BC-01360131: PowerLink MK2 Cable for B&O - Fully wired, white | White | 3,0 meter
BC-01360133: PowerLink MK2 Cable for B&O - Fully wired, white | White | 5,0 meter
BC-01360178: PowerLink MK2 Cable for B&O - Fully wired, white | White | 50 meter
BC-01360135: PowerLink MK2 Cable for B&O - Fully wired, white | White | 7,0 meter