AV-Connection Logo
Outlet, returned and demo goods by AV-Connection
Summer Sale at AV-Connection
New products at AV-Connection
REVIEWS
BRANDS
STEREO SYSTEM AND AMPLIFIERS Drilldown arrow icon STEREO AUDIO SOURCES Drilldown arrow icon TURNTABLE AND ACCESSORIES Drilldown arrow icon HI-FI STEREO ACCESSORIES Drilldown arrow icon

iFi Audio Go Link 2 Headphone Amplifer Starter Kit

iFi Audio
iFi Audio Go Link 2 Headphone Amplifer Starter Kit
iFi Audio Go Link 2 Headphone Amplifer Starter Kit
iFi Audio Go Link 2 Headphone Amplifer Starter Kit - Lifestyle
iFi Audio Go Link 2 Headphone Amplifer Starter Kit - Lifestyle
iFi Audio Go Link 2 Headphone Amplifer Starter Kit - Lifestyle

Compact USB-C DAC with Hi-Res Audio up to 384 kHz and DSD256, S-Balanced 3.5 mm output, ESS DAC and iFi Nexis support on Android

Inventory icon
Product no:
IFI-GOLINK2-STRTR
MasterCardVISAKlarna

Highlights:

• Compact USB-C DAC and headphone amplifier for phones, laptops and PCs
• Hi-Res Audio with PCM up to 384 kHz and DSD256
• S-Balanced 3.5 mm headphone output reduces crosstalk between channels
• Dynamic Range Enhancement increases the dynamic contrast between quiet and powerful passages
• ESS-based Bit-Perfect DSD and DXD DAC
• Two digital filters via iFi Nexis on compatible Android devices
• Weighs only 7.8 g and measures 13.7 x 1.2 x 0.76 cm

Compact USB-C DAC for Hi-Res Audio:

The iFi GO link 2 is an ultra-compact USB-C DAC and headphone amplifier that bypasses the built-in audio processing in a phone, laptop or PC. Digital audio is converted by the separate ESS-based DAC before the signal is sent directly to your headphones through the 3.5 mm S-Balanced output. This makes the GO link 2 a simple external audio solution for devices where the integrated headphone output or DAC is not sufficient.

Support for PCM up to 384 kHz and DSD256 makes it possible to play both standard music files and high-resolution Hi-Res Audio. This applies to streaming as well as locally stored music files in supported formats. The design is also made for portable use. The GO link 2 weighs just 7.8 g and measures 13.7 x 1.2 x 0.76 cm, allowing the DAC to take up minimal space alongside a phone or computer.

S-Balanced output and enhanced dynamics:

The conventional 3.5 mm headphone output uses iFi's S-Balanced circuit technology. This applies principles from balanced circuit design to a single-ended 3.5 mm connection. According to iFi, the technology reduces crosstalk between the left and right channels by 50%, helping to keep the channels better separated without requiring headphones with a balanced 4.4 mm connector.

The GO link 2 also features Dynamic Range Enhancement, which works with the difference between the quietest and loudest levels in the audio signal. At the same time, the DAC circuitry is optimised for low harmonic distortion. THD+N is specified at no more than 0.0015% at 1.27 V and 32 Ohm, while iFi states that distortion has been reduced by up to 62% compared with the original GO link. The result is a compact DAC designed with a focus on dynamics, channel separation and low distortion.

Fine-tune the sound with iFi Nexis:

The GO link 2 is compatible with iFi Nexis and provides access to additional settings directly from an Android phone. Two digital filters, Hybrid and Linear, can be selected to adjust the DAC's digital filtering according to personal preference. Nexis also supports over-the-air firmware updates, allowing updates to be installed without first downloading files and transferring them from a computer.

The additional Nexis functions, including firmware updates, digital filter selection and volume limiting, are exclusive to Android devices. The GO link 2 itself works as a compact USB-C audio solution for compatible phones and computers and delivers up to 79 mW at 32 Ohm. Output impedance is below 0.4 Ohm, while the signal-to-noise ratio is specified at a minimum of 125 dBA at 2.05 V.

Specifications:

• Hi-Res Audio: PCM up to 384 kHz and DSD256
• DAC chipset: Bit-Perfect DSD and DXD DAC by ESS
• Headphone output: S-Balanced 3.5 mm
• Output power: minimum 1.59 V / 79 mW at 32 Ohm
• Output power: minimum 2.0 V / 14 mW at 300 Ohm
• Output impedance: below 0.4 Ohm
• Signal-to-noise ratio: minimum 125 dBA at 2.05 V
• Dynamic range: minimum 125 dBA at 0 dBFS
• THD+N: maximum 0.0015% at 1.27 V and 32 Ohm
• Frequency response: 10 Hz - 80 kHz (-0.5 dB)
• Power consumption: approx. 0.2 W with no signal, approx. 1 W at maximum signal
• Dimensions: 13.7 x 1.2 x 0.76 cm
• Weight: 7.8 g
• iFi Nexis: firmware updates, Hybrid/Linear digital filter and volume limiting on Android
iFi Audio Go Link 2 Headphone Amplifer Starter Kit IFI-GOLINK2-STRTR: iFi Audio Go Link 2 Headphone Amplifer Starter Kit
97,54 EUR 
Add to cart

Brand description - iFi Audio

iFi Audio

Manuals and user guides for iFi Audio products

Unfortunately, as manufacturers do not make manuals or guides in all languages, we cannot guarantee that a local language manual is included for the item.
- If you are unsure about a manual available in the desired language, just contact us and we will do what we can to help.


AM Analogis Audio-Technica Audiovector B&O Cambridge Audio ClearAudio Dirac DSPeaker Elipson Eversolo Fosi Audio Goldring HiFi Rose iFi Audio Inakustik Klipsch Lenco Marantz Marshall Musical Fidelity One For All Onkyo Ortofon Pioneer Pro-Ject Q Acoustics Rega Rotel SONOS Spin-Clean Sumiko SVS Tangent Teac Technics Thorens WiiM Yamaha
CUSTOMER SERVICE
WEBSHOP INFO
• Payment
• Login
NEWS AND EVENTS
• Newsletter
SHOPS
• Webshop
Trustwave - Trusted Commerce Postnord DPD DHL FedEx
MasterCardVISAKlarna

ALL PRICES ARE INCL. 25% DANISH VAT/TAX

AV-Connection A/S  •  VAT no.: DK27907547  •  Kaervej 71-73  •  6400 Soenderborg  •  Denmark  •  Tel. +45 7442 1078  •  E-mail: [email protected]

arrow_upward shopping_basket