Biamp AMP-D225H network stereo amplifier (2x25W)

Features:
• Class D amplifier with built-in DSP
High efficiency amplifier with high quality sound
• 2-channel stereo amplifier
2x25 Watts @8 ohm or 2x35 Watts @4 ohm both in stereo
• Bridge mode
1x34 Watts @8 ohm or 1x56 Watts @4 ohm both in bridge mode
• USB audio
Provides audio playback and volume control on connected PC or Mac
• 1 LAN port
Enables control of the amplifier and adds two extra RS-232 ports for expansion of the control system
• 2 Bi-directional RS-232 ports
Used for control or expanding the AV system with more devices
• 4 General Purpose I/O ports
Used for extra input/output ports for control of relays, switches and sensors.
• Auto power function
Powers on when signal is detected, and enter sleep-mode automatically after 15 minutes without signal
• Input 1 Mix function
Possible to set Input 1 as an input, that mixes with the current selected input.
• 3 band equalizer
Works as an active filter for bass, mid and treble
• LED indicators on the front
Convenient located on the front for easy performance indication
• Easy mounting
Can be mounted in trunking systems, hidden or in 1RU using the Neets Rack Shelf
• Configuration
Configuration is done directly using a built-in configuration area that fully integrates with Neets Project Designer


Specifications:
Speaker output:
• Output power
• Stereo: 2 x 25 W @ 8 ohm
• Stereo: 2 x 35 W @ 4 ohm
• Bridge: 1 x 35 W @ 8 ohm
• Bridge: 1 x 55 W @ 4 ohm
• THD+N, 20 Hz - 20 kHz < 0.1 % @ 1 W
• Connector: 4 pin screw block

Analog audio input:
• Unbalanced inputs.: 4 stereo inputs
• Input impedance: < 100 k Ohm
• Max input level: 2 Vrms
• Input gain adjustable: +/- 12 dB
• Wake on signal: Adjustable level
• Connector: 2 x 4 RCA female

USB audio input:
• Supported OS:
• MAC OS-X
• Windows XP, Vista, 7, 8, 8.1, 10