Wide assortment of antenna amplifiers suitable for Cable TV and cable service providers, e.g. YouSee, Stofa and Glenten.
Antenna amplifiers for cable TV are usually characterised by being useable for a wider frequency range than amplifiers for normal antenna, as 4G/LTE frequencies (800 MHz band) do not need to be taken into account in the antenna signal. For the most future-proof installation, we therefore recommend that you choose an amplifier which can amplify up to the 1000 MHz range, as the Triax IFA 384 and 388 models can.
Furthermore, it is a good idea to choose a model with tilt/slope adjustment. This can compensate for a poor signal at one end of the frequency range, which is often the result of long cable routes, e.g. if you live at the end of a residential street or in the outer flat of a block of flats.
For an antenna amplifier for cable TV, it is often possible to loop the return path for Internet via cable TV, although only passive return paths are generally used in Denmark.
Remember that it is still important that there are terminated unused and open antenna outputs on the amplifier, as you otherwise risk that 4G/LTE noice enters the antenna system.
Practical two-device amplifier. Perfect for smaller home installations where you have to split your signal in two but do not want to lose any quality. - SEE MORE
This amplifier with gain control and tilt adjustment has 1 output and delivers ultra-clear TV signals with a gain of 28 dB when connected to the TV. - SEE MORE
This amplifier is with adjustable gain and has four outputs. It delivers ultra-clear TV signals, with a gain of 23 dB. Has active return-path. - SEE MORE
HI-FI STEREO
